action camera,360 degree camera,360 panoview camera

Shenzhen Buoth Industry Co.,Ltd.

C201/C202 Model Industrial Camera Upgrade Operation Process

 

The specific operation process is as follows:

一、C201 USB Upgrade operation process

1.    unzip the zip file c201_update_xxx.zip,after unzip the file is c201_update .

Copy the file c201_update to the USB flash drive. (The file format of the USB flash drive must be FAT type)


2.    Plug the USB flash drive into the camera's USB port and power on. After power-on, if the U disk has an indicator light, it will flash, indicating that the U disk file is being read.The upgrade will be performed automatically (the upgrade process will take about 3~4 minutes), and the camera indicator light will turn green and the upgrade will be completed.

3.    Insert the HDMI cable to check if the image is normal.

4.    Unplug the U disk, camera power on again, and the machine works normally.

 

二、C202 USB Up grade operation process

1.    unzip the zip file c202_update_xxx.zip,after unzip the file is c201_update . Copy the file c201_update to the USB flash drive (the file format of the USB flash drive must be FAT type);

2.    Plug the USB flash drive into the camera's USB port and power on the power.(After power-on, if the U disk has an indicator light, it will flash, indicating that the U disk file is being read);The upgrade will be performed automatically (the upgrade process will take about 3~4 minutes), and the camera indicator light will turn green and the upgrade will be completed.

3.    Insert the HDMI cable to check if the image is normal.

4.    Unplug the U disk, camera power on again, and the machine works normally.

 

Note: Since the C201/C202 uses the same kernel program, unzip the compressed package  C201 and C202 with the same file name to facilitate the kernel to identify the file.

Therefore, you cannot manually modify the file name.


Previous:
Next:

RELATED POSTS